You are here: Home → Products → Accessories
Navigation
Contact Us

If you can't find what you are looking for please Contact Us.

 
International Light
Personal tools
Document Actions

Accessories

International Light Technologies offers a wide variety of accessories including tripods, power cords, computer and extension cables, cases and underwater sensor modifications.Please refer to the chart below for a list of the standard, stock accessories.

If you have a requirement for a custom accessory that you can not locate in the list below please contact our engineering dept for further assistance.
Accessories
Part Number Description Specifications
A26 Sunglasses Prevents eye damage by blocking UV and IR radiation.
A204
 Small Tripod Adjustable tripod for use with RPS900-C and SED sensors ¼-20 UNC
A205 Bench Post Adjustable post with base for use on or off optical benches.
A250 Port Adapter Test light source fixture for use with the INS250 Integrationg Sphere allows a light source to be measured in the integrating sphere to easilly be wired to an external power source without measurement interference.
A405 Carrying Case for IL1700 &A415 For IL1700, A415 and/or detectors and accessories
A406 Cable Adapter Cable: SEE Detector To IL1700
A407 Cable 10' Extension Cable For SED Detectors
A411 Cable Adapter Cable: SEL Detector To IL1700
A412 Cable, IL1700 RS232 w/DB25 RS232C Cable, Ten Feet, Male-Female
A413 Cable, RS232 RS232C Cable, Ten Feet, Male-Male
A417 AC operated battery option Includes internal battery charger, with 6 installed and charged rechargeable Ni-Cad batteries.
A425 Oscilloscope adapter, DB15 to wire Connects SED detector to Oscilloscope. For use with solid-state SED033, SED005, and SED007 two-wire detectors only. SED185, 220, and 240 phototube detectors and SED623, 624, and 625 thermopile detectors require additional power supply connections not provided by the A425 adapter.
A430 Detector Amplifier 0-5 V low impedance output to provide interface between low level detector currents and the low impedance voltage receiving equipment. Connector for SEL type detectors only. All other will require adapter (A508) or hard wiring. The A430 Detector Amplifier is intended for use with solid-state SEL033, SEL005, and SEL007 two-wire detectors only. SEL185, 220, and 240 phototube detectors and SEL623, 624, and 625 thermopile detectors require additional power supply connections not provided by the A430 amplifier.
A430 Manual
A440 Cable, IL1700 RS232C w/DB9 Cable, IL1700 RS232C w/DB9
A507 Cable, extension 10' Extension Cable For SEL / SL Detectors
A508 Cable SED Detector To IL1400A
A510 Cable, RS232 /detector IL1400 Y shaped cable connects to computer and detector.
A511 Cable, RS232 /detector IL1400 Y shaped cable connects to computer and detector w/DB9 .
A516 IL1400 A/C power cord A/C power cable for 120 V.
A525 Oscilloscope adapter,20pin card edge Connects SEL detector to Oscilloscope. Intended for use with solid-state SEL033, SEL005, and SEL007 two-wire detectors only. SEL185, 220, and 240 phototube detectors and SEL623, 624, and 625 thermopile detectors require additional power supply connections not provided by the A525 adapter.
A601 PM-1 Power Module For use with the TREC1600 for total illumination control, includes cable
A602 Cable, MiniDin6 M/M blk 12ft. MiniDin6 M/M blk 12ft.
A603 Cable, MiniDin6 M/StpLead blk 6ft MiniDin6 M/StpLead blk 6ft
CC390 Carrying Case, IL290 - IL393 For IL390C, IL393, and IL290A
CC500 Carrying Case: IL1400,TREC1600 For IL1400A, IL70 and TREC 1600
PUBXXXX MANUALS IL- 1400, 1700, 393, 390, 70 and RPS-900, 380, 200 Manuals
RPS-HP Notebook Computer for use with RPS spectroradiometers. Comes complete with all RPS software installed.
SUD(SUL)XXX Underwater Detector Modification Underwater version of SED(SEL)XXX/W Detectors. Includes 100 feet of cable with waterproof housing and pressure tested to 100 foot depths. (W required).
A2706
 LED Mount for INS150
 Prototype Multi holed holder for customized source mounting. Includes MagPro Magnetic mounting system.
A2707
 LED Mount for INS150
 Leaded LED holder for 3 and 5mm packaged singe and bi-color LEDs. Includes MagPro Magnetic mounting system.
A2708
 LED Mount for INS150 SMT holder for 1206 and PLC sources. Includes MagPro Magnetic mounting system.
A2709
 MP-PRP Intensity Aperture
 Connects to the LED barrel to allow use with the MagPro magnetic mounting system. Especially useful on the end of the LED barrel for quick mounting of LEDs for testing beam candela.
A251
 INS250 Lamp Adapter
 Adapter for INS250 to allow the use of the MagPro mounting boards A2706, A2707, and A2708