ILTOPM1-D SED008/W

ILTOPM1-D - Optical Process Monitor

The OPM Series optical process monitors are designed for on-line monitoring of optical intensities in real-time applications.

The OPM1-D remote detector version is configured to accept most of the standard detector / receptor / filter combinations in the ILT line (available separately) to allow greater flexibility in tailoring the OPM1-D system to almost any monitoring application. The sender has a built-in read-out as well as the electrical interface for 4-20 mA operation. The foil-shielded detector cable interfaces with the sender through a 6-pin mini-DIN connector set.

HIGH INTENSITY, LOW PRESSURE MERCURY DETECTOR

Specifically designed to measure high intensity low-pressure mercury lamps at 254 nm.

Measurement Range: Each ILTOPM1 system is tailored for a customers specific application requirements - contact our knowledgeable sales staff for more information

Spectral Range: 214 – 360 nm, calibration wavelength at 254 nm

Order part number: ILTOPM1-D (optical process monitor), SED008/W (detector)

Applications:  This detector, along with the ILTOPM1-D Optical Process Monitor, is designed to continuously monitor and react to the output from high intensity, low pressure mercury sources. Since low-pressure mercury lamps produce better than 95% of their energy at 254 nm, they are easily measured by this detector without additional bandwidth filtration.