ILT6000, SED033/Y/TD

ILT6000 Multi-Poing Lux/Candela Measurement System

ILT6000, SED033/Y/TD

Part Number: ILT6000, SED033/Y/TD

ILT6000 Multi-Point Lux/Candela Measurement System

Research Illuminance Light (lux) Measurement System Monitors Up To 10 Locations For Flash Or CW Light

  • Direct readings in lux, candela and effective candela.
  • ILT data-light software included.
  • User controlled or Auto: Range, Zero/Dark, Sample Rate, Software applications.
  • 4-20 mA Output.
  • Power: USB or Built-in Re-Chargeable Battery Pack.
  • Multi-System Simultaneous Continuous Monitoring.
  • NIST-Traceable/ISO/IEC 17025:2017 Accredited Calibration.
  • Sample Rate Up to 100 Hz, Programmable.
  • Flash/light intensity profile with up to 4096 data points over 80 msec to 40-second durations.
  • Custom & OEM Inquiries Welcome.

 

< Back to Photostability Light Measurement Table

Response Curve

DETECTOR: SED033/Y/TD with Photopic Filter
 

SED033/Y/TD The photopic filter used in this detector was redesigned using proprietary composite filter design software to match the CIE V(λ) Photopic curve. Can also be used to measure candela of a continuous source or effective candela of a flashing source for distances up to 25 feet.
 

  • Dynamic range: 8e-5 to 5e+5 lux
  • Measurement range: 400-700 nm
  • Dimensions: 34 x 42 mm dia
  • Ordering Part#: Includes ILT6000-10 with ten channels, 10 pcs of SED033/Y/TD photopic detector including cal factors for foot-candles, Lux and cd at user-specified distance.

 

SED detector

 

 

 

 

 

 


NOTE: ILT6000 can be configured to control 2-10 sensors. For distances greater than 25 feet, the SED033/Y/L30 sensor with a range of approximately 7e-6 to 3e+3 can be used in place of the SED033/Y/TD sensors.

 

 

Filters and input optics are removable and may be ordered separately from the detector assembly to allow filter and input optic swapping.

For the latest meter specifications, data sheet, installation guide, tech notes and software, visit the ILT6000 page here.