ILT770-UVA350 Complete System For Measuring UVA Phototherapy Light Sources
ILT770-UVA-350 Complete System For Measuring UVA Phototherapy Light Sources
Use to validate lamp output and patient exposure during psoralen UVA (PUVA) treatment of vitiligo, psoriasis, eczema, and Mycosis fungoides
System Benefits
- Measures UVA from most types of UVA phototherapy lamps and LEDs with peaks in the 350 nm range
- Irradiance Range: 0.1 mW/cm2 to 199.9 mW/cm2
- Dose Range: 0.1 mJ/cm2 to 999 KJ/cm2
- ISO/IEC 17025:2017 Accredited, NIST traceable calibration for results you can trust
- Portable, hand-held system
- Easy-to-use interface
- Made in the USA
- Calibration for other wavelengths or lamp peaks in the UVA also available
Complete System Includes
- ILT770 light meter
- Compact detector with UVA filtration
- Calibration & certification for 350 nm
- USB cable for use data downloads and device charging
- Rugged carrying case
< Back to All ILT770 UV Phototherapy Meters
< Back to All Light Measurement Systems
< Back to Phototherapy Light Measurement Table
Simplifying Phototherapy Light Measurements
The ILT770 UV intensity meter and measurement system as everything you need to start validating the light output from your phototherapy lamps. It's not enough to trust the manufacturer's specifications. You must verify that the system you're entrusting the health and well being of your patients is doing what it says, and applying the correct UV exposure levels during treatment.
The ILT770-UVA-350 is specifically configured and calibrated at 350 nm. Regardless of the light source your system uses, with the touch of a button the ILT770 will do the following:
- Confirm the amount of light reaching a patients skin
- Calculate the dose in J/cm2
- Validate the min, max, and average irradiance (mW/cm2)
- Save the results for exporting to your PC
ILT770-UVA-350 Response Curve
Validating your phototherpay light source does not need to be a complex task. The ILT770 simplifies light measurement by automatically selecting the input range (auto-ranging) so the user does not need to manually dial it in. Easily toggle between irradiance and dose readings with a single button. The graphical interface not only displays the uniformity of the light over time, but also calculates the min, max and average. The detector is attached with 3 foot long cable, reducing the risk of user exposure. The sensor's low profile housing makes lamp access easy.
ILT is an USA-based company. We have been designing light measurement systems since 1965. All of our meters are built and calibrated on-site at our Peabody, Massachusetts head quarters. We are an ISO9001 certified facility and our calibration lab is ISO17025 accredited. All of our meters come with an ISO17025 accredited calibration certificate and are NIST traceable.
