ILT Light Measurement Accessories
International Light Technologies offers a wide variety of accessories including tripods, power cords, computer and extension cables, cases and underwater sensor modifications. Please refer to the chart below for a list of the standard, stock accessories.
If you have a requirement for a custom accessory that you can not locate in the list below please contact our engineering dept for further assistance.
|A26||Sunglasses||Prevents eye damage by blocking UV and IR radiation.|
|A204||Small Tripod||Adjustable tripod for use with RPS900-C and SED sensors ¼-20 UNC|
|A205||Bench Post||Adjustable post with base for use on or off optical benches.|
|A250||Port Adapter||Test light source fixture for use with the INS250 Integrating Sphere allows a light source to be measured in the integrating sphere to easily be wired to an external power source without measurement interference.|
|A254||Diffuse Reflectance Standard||Used to create a white reference for reflectance measurements. 2" diameter surface area #6080 White Reflecting Coating that produces a stable, efficient and highly diffuse reflectance over a broad wavelength.|
|A400||Belt Radiometer Charger||ILT400/ILT490 Belt Radiometer charger with yellow tipped female connector.|
|A400UNICHARGER||Belt Radiometer Charger||ILT400/ILT490 Belt Radiometer charger with all metal tip male style connector.|
|A405||Carrying Case for ILT1700 & A415||For ILT1700, A415 and/or detectors and accessories|
|A406||Cable||Adapter Cable: SEE Detector To ILT1700|
|A407||Cable||10' Extension Cable For SED Detectors|
|A411||Cable||Adapter Cable: SEL Detector To SED connector for use with ILT2400, ILT5000 and ILT6000 meters. (Note: Use A411-T for use with Thermopile sensors SEL623, SEL624 and SEL625)|
|A412||Cable, ILT1700 RS232 w/DB25||RS232C Cable, Ten Feet, Male-Female|
|A413||Cable, RS232||RS232C Cable, Ten Feet, Male-Male|
|A417||AC operated battery option||Includes internal battery charger, with 6 installed and charged rechargeable Ni-Cad batteries.|
|A425||Oscilloscope adapter, DB15 to wire||Current to Voltage converter/adapter connects "D" type (ILT1700) detectors to Oscilloscopes, volt meters, data loggers, and computers. Recommended for use with solid-state SED type (SED033, SED005, and SED007), SPD, and XRD type two-wire detectors only. SED185, 220, and 240 phototube detectors and SED623, 624, and 625 thermopile detectors require additional power supply connections not provided by the A425 adapter. PLEASE NOTE: Low level light signals require that the voltage measuring instrument have sufficient sensitivity and resolution to measure the small resulting voltages.|
|A430||Detector Amplifier||0-5 V low impedance output to provide interface between low level detector currents and the low impedance voltage receiving equipment. Connector for SEL type detectors only. All other will require adapter (A508) or hard wiring. The A430 Detector Amplifier is intended for use with solid-state SEL033, SEL005, and SEL007 two-wire detectors only. SEL185, 220, and 240 phototube detectors and SEL623, 624, and 625 thermopile detectors require additional power supply connections not provided by the A430 amplifier.
|A440||Cable, IL1700 RS232C w/DB9||Cable, ILT1700 RS232C w/DB9|
|A507||Cable, extension||10' Extension Cable For SEL / SL Detectors. DISCONTINUED.
|A508||Cable||SED Detector to ILT1400 (SEL Detector Connector)|
|A516||A/C Power Cord, IL1400A or IL1400BL (non USB version)||A/C power cable for 120 V.|
|A525||Oscilloscope adapter, 20pin card edge||Current to Voltage converter/adapter connects "L" type (ILT1400) detectors to Oscilloscopes, volt meters, data loggers, and computers. DISCONTINUED.
|A803||Multiplexer/Datalogger||Converts ILT1700 Research Radiometer into a multi-input data-logging radiometer for long-term, continuous monitoring and light measurement data collection from up to eight (8) ILT detectors.|
|A950F w P11
|Inline 1/2 Inch Filter Holder||For use between two fiber optic light guides. Includes two collimating lenses with SMA905 connectors. Connectors are removable to allow insertion of 1/2 inch filters. Commonly used filters are Neutral density filters, Short pass and Long pass filters. Note: P11 Rigid 2" Fiber Optic Light Guide also shown in photo sold separately.|
|CC390||Carrying Case, IL290 - IL393||For IL390C, IL393, and IL290A|
|CC500||Carrying Case: ILT1400, TREC1600||For ILT1400, ILT70 and TREC 1600|
|P10||Patchcord Adapter||SMA905 Male to SSTL ferrule with 11 mm OD with 1000 um Fiber. Connects ILT sensors to ILT integrating spheres and other Female SMA905 optics|
|P11||Patchcord Adapter||SMA905 Male to Male adapter with 1000 um Fiber. Connects ILT spectrometers and detector to ILT Integrating spheres and other Female SMA905 optics|
|PUBXXXX||MANUALS||ILT-1400, 1700, 393, 390, 70 and RPS-900, 380, 200 Manuals|
|RPS-HP||Notebook Computer||for use with RPS spectroradiometers. Comes complete with all RPS software installed.|
|SUD(SUL)XXX||Underwater Detector Modification||Underwater version of SED(SEL)XXX/W Detectors. Includes 100 feet of cable with waterproof housing and pressure tested to 100 foot depths. (W required).|