ILT5000, SED033/F/A313-7MM Research System

Audience Scanning/Laser Light Measurement System

ILT5000, SED033/F/A313-7MM

Part Number: ILT5000, SED033/F/A313-7MM

Audience Scanning / Laser Light Measurement System

  • 10+ Decade Dynamic Range of Optical Analysis
  • Pico-ammeter: 10fA to 1mA (calibrated from 100fA - 1mA)
  • Wireless Communication, Built-in
  • User controlled or Auto: Range, Zero/Dark, Sample Rate
  • 4-20 mA Output
  • 15 pin D Sub and SMA sensor/input ports
  • “Set it & Forget It” Remote Data Logging
  • Power: USB or Built-in Re-Chargeable Battery Pack
  • Multi-System Simultaneous Continuous Monitoring
  • Includes DataLight II Software and Labview Sample Code
  • NIST-Traceable/ISO17025 Accredited Calibration
  • Sample Rate Up to 100 Hz, Programmable
  • Custom & OEM Inquiries Welcome

 

< Back to Audience Scanning and Laser Safety Product Table                       < Back to Flash Measurement Product Table

Dynamic Range: 7e-11 to 5e-2 W/cm²

Response Curve

Measurement Range: 400 -1000 nm
Dimensions: 30 x 42 mm dia.
Ordering part#(s): Includes ILT5000*, SED033/F/A313-7MM (sensor/filter/diffuser with customized 7 mm aperture) and PIR calibration

* Software Included / Tablet PC Sold Separately
 

SED033 detector
 

 

 

 

 

 

 

 

 

 

 

Filters and input optics are removable and may be ordered separately from the detector assembly to allow filter and input optic swapping.


 

ILT5000-peak-light-level-screen


Audience Scanning / Laser Light Measurement System


The ILT5000, SED033/F/A313-7MM Audience Scanning Laser Light Measurement Kit makes taking laser light show measurements simple, fast, reliable and repeatable.


ILT worked with a group of audience scanning laser safety experts to customize the ILT5000, SED033/F/A313-7MM and the peak capture software reducing measurement time from a over a half hour to just a few minutes. The system was configured to allow rapid measurements of peak exposure for single and/or multiple lasers of any combination of colors and provides an easy readout in W/cm2.


Along with peak capture mode, the ILT software also had the added ability to measure the total dosage or exposure in J/cm2 with the click of the mouse or a tap on the screen. (Separate systems and/or optics are available to allow testing of the total laser power of individual lasers in Watts.)

For the latest meter specifications, data sheet, installation guide, tech notes and software, visit the ILT5000 page here.